|
|
11-16-2005, 08:41 PM
I just paid my vendor fee so I will be working out pricing for you guys.....as for the big name vendors, we deal with some of them on a regular basis and can offer excellent pricing on their products.
Here are some of the ones we deal with regularly
PSC
AlloyUSA
Summit Machine
Rubicon Express
Rockstomper
Blue Torch Fabworks
Currie
Tom Woods
High Angle Driveline
Teraflex
BDS
Big Daddy's Offroad
Warn
T-Maxx
Full Line of Weld-in Inserts/Bungs/Tubing/Threaded Joint Setups/Etc.
Trailready
Staun
Clayton's Offroad
and there are a bunch more.......
PM, Email or call and ask for Andy.......
11-16-2005, 08:44 PM
Welcome aboard Andy!
11-16-2005, 08:48 PM
First Giveaway in Process. Info coming soon.
Andy
11-16-2005, 08:49 PM
Welcome.
Do you happen to have any tubing inserts that are hex rather than the round PSC ones I have? I saw some hex ones somewhere but they did not have the size I needed (7/8"x18).
These are the ones I have:
Just thought a hex one would make it a little nicer to adjust the tie rod/drag link and get the jam nuts on tight rather than having the channel lock marks all over the tubing.
11-16-2005, 08:53 PM
I do have some that I have made that have a flat in them. We are waiting on a new stock order for them now. The ones PSC has are the same ones from Summit Machine that we carry normally. I can get you the ones with the flat if you would like or you can have a flat cut in at a local machine shop, should be pretty cheap.Originally Posted by Cue-Ball
Andy
11-16-2005, 08:55 PM
Andy, that's a good idea, there is a machine shop just down the street I might have to take them in and see what they can do for me.
A flat spot on each size would work just fine.
Thanks.
11-16-2005, 08:58 PM
We typically mill them off for a 1 1/8" or adjustable wrench.....No prob, let me know if I can help with anythign else.
Andy
11-17-2005, 10:00 PM
We have had a couple of questions about our other capabilities so.....
Yes, we do build custom axles to customer specs, D44/HP44/HP60/D60/8.8/14 bolt/etc.
We carry and install a wide variety of gears from brands like Yukon, Precision, Spicer and a full line of Lockers from ARBs to Lockrights.
We do alot of bracket kit installs, axle narrowing, custom maching, etc. as well.
We also do custom laser cutting in small or large lots. Up to 1/2" Steel and we have access to a full fab/machine shop that can shear and break up to 1/2" as well.
We bend all kinds of custom cages and would be more than willing to put together a weld together kit for you guys if you would like a groupl buy.
Let me know if we can help with anything.
Thanks
Andy
11-17-2005, 10:23 PM
nice to have you on mallcrawlin Andy.
11-17-2005, 10:42 PM
Welcome, good to see you here. I'll do my best to get you some orders. Please PM me a price on a pair of 30" extended cheapo hydro shocks shipped to 29325. Thanks.
Cam
11-17-2005, 10:57 PM
PM Sent
11-18-2005, 02:36 PM
Can you give me a price on a CHEAP lunchbox locker for an HP30, shipped to Napa, Ca. 94558?
11-18-2005, 06:47 PM
Sweet, do you want to sponsor my buggy build?
11-22-2005, 12:37 PM
Welcome aboard Andy. Nice to see CRS over here.
I'm not sure you've done one before, but I'd like to see what you guys could come up with in terms of a cage for a ZJ. I'm not sure if I want to take on the expense of buying the tools to build my own, and I'm sure you've got much more experience at it, and could do a better job anyway.
JH
11-23-2005, 12:26 AM
JH,
Give me a shout, I would be more than happy to put something together and if some of the other guys on here would be interested maybe we could do a deal on multiples. Give me a shout at the shop wed if you have a chance.
Andy
12-02-2005, 08:48 PM
Can you get me a price on the Tera 2lo kit for a 231?
Am picking up a 231 next week and figure while it is out of the vehicle now would be the time to add that feature.
This means I will be looking to your for the front locker I asked about soon also.
Dirk
12-02-2005, 10:26 PM
Nice to see you on here Andy.
For those who don't know him.. I can vouch for him. Best offroad shop in the area - high quality work with good prices. I've never known anybody dissatisfied.. and alot of my friends get things done there. Carolina Rock Shop is a pretty big name in the charlotte / carolina area.
*edit* sorry about the drill press
Originally Posted by ATL ZJ
12-04-2005, 05:31 PM
No prob man, I will get you a price tomorrow when I get into the shop
12-04-2005, 05:32 PM
Thanks man, we try. Let me know if we can help with anything.Nice to see you on here Andy.
For those who don't know him.. I can vouch for him. Best offroad shop in the area - high quality work with good prices. I've never known anybody dissatisfied.. and alot of my friends get things done there. Carolina Rock Shop is a pretty big name in the charlotte / carolina area.
*edit* sorry about the drill press
Andy
12-04-2005, 05:38 PM
Sounds good Andy, right now just need the price for the 2lo, will deal with the locker issue after I recover from Christmas, damn the wife and kids want alot of stuff
12-04-2005, 05:40 PM
No problem, I know the feeling. My wife and I did our christmas shopping last night.......$$$$
12-11-2005, 08:01 PM
can you handle international orders,
still have a PSC 621 MR on my wishlist.
12-11-2005, 08:50 PM
I have not had to deal with it before but I will be happy to try to help you out. Let me know what address it is going to and I will get you a quote....
Thanks
Andy
12-12-2005, 04:06 AM
I've spoken to Andy on the phone a couple of times in the past, very helpful guy.
Welcome aboard!
Brett
12-12-2005, 02:33 PM
PM send
| « Previous Thread | Next Thread » |
| Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |
